Aktuālie piedāvājumi
35%
off
off
120
Days
20
HRS
36
MINS
Galvenā Bluetooth un FM audio uztvērējs
Ampire BTR200X automašīnas Bluetooth audio uztverejs
Pieejamība:
Noliktavā
Pieejams daudzums:
1
Bluetooth audio uztvērējs ar automātisko ieslēgšanas funkciju automašīnām aprīkotām ar AUX audio ieeju.
54.00 €
Apraksts
Ierīce izmanto A2DP protokolu, kas ļauj vienlaicīgi klausīties mūziku caur Ampire BTR200 un izmantot automašīnas Bluetooth brīvroku sistēmu.
Ierīce atceras 9 pēdējos telefonus ar kuriem ta bija sapārota un automātiski savienojas ar telefonu pec automašīnas iedarbināšanas.
Ierīce ir paredzēta slēptai uzstādīšanai (nav redzama) un neaizņem vietu automašīnas salonā.
CONNECTIONS
- Sound output: 3.5mm jack plug
- Power supply: +12V ignition (ACC/K15) with fuse 2A
- Remote output: Blue cable +12VDC/20mA
EQUIPMENT
- 3.5mm jack plug with signal output 1.0V
- splash-proof, marine certified
- automatic power on
- Automatic remote output (+12V DC)
- QDL licensed Bluetooth® 5.0
- A2DP in highest EDR specification
- aptX(TM) audio codec from Qualcomm®.
- BT audio streaming also of lossless files such as Wave, Flac, Lossless, etc.
- SSID display name: BTR200X
- 10m range
SMARTPHONE COMPATIBILITY
- Android (Bluetooth® and Bluetooth® aptX)
- Apple iOS (Bluetooth®)
OPTIONAL ACCESSORIES
55100-KLINKE AMPIRE interference suppression filter
TECHNICAL DATA:
- Voltage: +12V DC
- Current consumption including remote output: <65mA
- Voltage/current remote output: +12V DC, max.20mA
- Bluetooth® 5.0
- aptX(TM) audio codec by Qualcomm®.
- Frequency range: 20Hz-20kHz
- Encoding: Low Complexity Subband Codec (SBC)
- Bit rate: up to 384 kbps (48 kHz sampling)
- Audio output voltage: 1V RMS
- Housing dimensions: Height: 20mm, Width: 65mm, Length: 50mm
- Red cable: +12V (0.459mm² or 26x 0.15mm), 305mm length
- Black cable: ground (0.459mm² resp. 26x 0.15mm), 305mm length
- Blue cable +12VDC/20mA (0.459mm² resp. 26x 0.15mm), 305mm length
BLUETOOTH APPROVAL:
- Declaration ID D068331
- Referenced Qualified Design ID 173056
- Listing Date 2024-04-18
PAIR A DEVICE:
- make sure Bluetooth® is switched on in your device
- switch on the ignition
- the LED (6) flashes blue (pairing mode)
- Select "BTR200X" in the Bluetooth® menu of your device to connect.
- after successful connection, the LED lights up continuously and a single beep sounds over the audio system.
NOTE:
- up to 9 devices can be connected to the BTR200X, but only one device can stream music at a time
- The BTR200X always remembers the last tuned device and connects automatically after power on.
- a connection to another device must be done manually, as described above
- if the connected device is out of range for more than one minute, the connection is automatically interrupted and the BTR200X goes into pairing mode [the LED (6) flashes].
- can only be used in vehicles and not in continuous operation
- Sound output: 3.5mm jack plug
- Power supply: +12V ignition (ACC/K15) with fuse 2A
- Remote output: Blue cable +12VDC/20mA
EQUIPMENT
- 3.5mm jack plug with signal output 1.0V
- splash-proof, marine certified
- automatic power on
- Automatic remote output (+12V DC)
- QDL licensed Bluetooth® 5.0
- A2DP in highest EDR specification
- aptX(TM) audio codec from Qualcomm®.
- BT audio streaming also of lossless files such as Wave, Flac, Lossless, etc.
- SSID display name: BTR200X
- 10m range
SMARTPHONE COMPATIBILITY
- Android (Bluetooth® and Bluetooth® aptX)
- Apple iOS (Bluetooth®)
OPTIONAL ACCESSORIES
55100-KLINKE AMPIRE interference suppression filter
TECHNICAL DATA:
- Voltage: +12V DC
- Current consumption including remote output: <65mA
- Voltage/current remote output: +12V DC, max.20mA
- Bluetooth® 5.0
- aptX(TM) audio codec by Qualcomm®.
- Frequency range: 20Hz-20kHz
- Encoding: Low Complexity Subband Codec (SBC)
- Bit rate: up to 384 kbps (48 kHz sampling)
- Audio output voltage: 1V RMS
- Housing dimensions: Height: 20mm, Width: 65mm, Length: 50mm
- Red cable: +12V (0.459mm² or 26x 0.15mm), 305mm length
- Black cable: ground (0.459mm² resp. 26x 0.15mm), 305mm length
- Blue cable +12VDC/20mA (0.459mm² resp. 26x 0.15mm), 305mm length
BLUETOOTH APPROVAL:
- Declaration ID D068331
- Referenced Qualified Design ID 173056
- Listing Date 2024-04-18
PAIR A DEVICE:
- make sure Bluetooth® is switched on in your device
- switch on the ignition
- the LED (6) flashes blue (pairing mode)
- Select "BTR200X" in the Bluetooth® menu of your device to connect.
- after successful connection, the LED lights up continuously and a single beep sounds over the audio system.
NOTE:
- up to 9 devices can be connected to the BTR200X, but only one device can stream music at a time
- The BTR200X always remembers the last tuned device and connects automatically after power on.
- a connection to another device must be done manually, as described above
- if the connected device is out of range for more than one minute, the connection is automatically interrupted and the BTR200X goes into pairing mode [the LED (6) flashes].
- can only be used in vehicles and not in continuous operation
