P10 is a compact and powerful mono amplifier with peak music power of 800 Watts @ 2 ohm load.
A popular and good raw power amplifier with high reliability.
- Built-in low-pass filter for subwoofers, variable between 50 and 200 Hz.
With the filter disconnected the amplifier works as a fullrange amplifier.
- Built-in protection circuits shut down the amplifier in the event of overloads
- BASS BOOST switch, +6 dB.
- Remote bass level control is included
- High level input with automatic start.
- Cooling fan in the bottom plate.
-RMS output power @ 14,4 V
![]() | Specifications | ![]() |
| Number of channels | 1 |
| Amplifier class | AB |
| Peak power | 800 W |
| Output power in 2 ohm | 450 W RMS |
| Output power in 4 ohm | 260 W RMS |
| Damping factor | > 80 |
| S/N ratio, A-weighted | > 95 dB |
| Frequency range | 10 Hz - 30 kHz |
| Low level output | No |
| Input sensitivity | 0,25 - 5 V |
| Input impedance | 22 kohm |
| Input impedance, high level | 47 ohm |
| High pass filter | yes |
| Low pass filter | 50 - 500 Hz |
| Grand bass filter | Bass boost OFF - +6dB |
| High level input with auto start | Yes |
| Remote phase shift control | No |
| Power consumption (idle) | 0,5 A |
| Remote bass level control | Yes |
| Power consumption (max) | 50 A |
| Integrated fan | Yes |
| Fuses | 2 x 25 A |
| Dimension (W x D x H) | 189 x 322 x 51 mm / 7,44 x 12,67 x 2" |
| Weight | 3 kg |