Alpine PDX-V9

SPECIFICATIONS

CEA-2006 Power Ratings

• CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N)

Max Power Output Ratings

• Max Power: 1600W

RMS Power Ratings

• Per channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)


• Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N)


• Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V <1%THD+N)

Sound Tuning

• Crossover Frequency (CH1/2, HPF): 30 - 600 Hz (x1), 300 - 6k Hz (x10), -12 dB/oct.


• Crossover Frequency (CH3/4, HPF): 30 - 600 Hz (x1), -12 dB/oct.


• Crossover Frequency (CH3/4, BPF): 30 - 600 Hz (HPF), 300 - 6k Hz (LPF), -12 dB/oct.


• Crossover Frequency (Subwoofer): 50 - 600 Hz, -24 dB/oct.


• Subsonic Filter: 3 - 30 Hz, -24 dB/oct.

Dimensions

• Foot Print (WxHxD) mm: 257 x 50.8 x 192 mm


• Foot Print (WxHxD) in: 10-1/8'' x 2'' x 7-1/2''

General

• Power Requirements: 14.4 V.DC (11-16 V allowable)


• Input Sensitivity (RCA Input): 0.2 - 4 V (CH1/2, CH3/4), 0.1 - 4 V (Subwoofer)


• Input Impedance: >10k ohms


• Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 3 - 100k Hz


• Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 3 - 600 Hz


• THD+N (10W into 4 Ohms) for CH-1/2/3/4: <0.005 %


• THD+N (10W into 4 Ohms) for Subwoofer: <0.006 %


• THD+N (Rated Power into 4 Ohms) for CH-1/2/3/4: <0.03 %


• THD+N (Rated Power into 4 Ohms) for Subwoofer: <0.05 %


• Damping Factor for CH-1/2/3/4: >500 into 4 ohms at 100Hz


• Damping Factor for Subwoofer: >1000 into 4 ohms at 100Hz


• Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 112 dB


• Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 119 dB


• Weight: 2.7 kg

FEATURES

Install

• Connectors: Quick Connect Terminals for Power Supply and Speaker Output


• Terminal Layout: One-Sided


• Mounting Design: Easy Stacking and Smart Installation

General

• Amplifier Type: Class-D (Digital)


• Channel Design: 4-channel + 1-channel (Mono)


• Power Supply Design: DC-DC PWM Power Supply


• Pre-Amp Stage: Discreat


• Final Outputs: MOSFET


• Crossover: Variable High Pass, Low Pass and Band Pass Filter


• Gain Control: Continuously Adjustable Gain Control


• Subsonic Filter: Variable Subsonic Filter


• Bass Control: Remote Bass Control (RUX-KNOB) Ready


• Low-battery Protection: Low-battery Protection


• Low-impedance Possibility: Low-impedance Possibility


• Current Protection: Over-Current, Over-Voltage and Thermal Protection


• Board Circuitry: S.T.A.R. Circuit


• Board Design: 6-layer Glass Epoxy PC Board


• Power Indicator: Top Mounted LED Power/Status Indicator


• Input Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)


• Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)


• Thermal Control: Thermal Management Control